Home > Products > Resistive Touch Controller

Resistive Touch Controller

The controller that AMT’s resistive touch screen works with is PenMount, a series firstly launched in 1992. PenMount series provides customers with the total solution covering drivers and controller IC. Whatever the size is, it works perfectly with 4-, 5- and 8-wire resistive touch screen and capacitive touch screen and further brings the features of your product into full play.

PenMount controller chip supports both RS-232 and USB interfaces while PenMount control board supports RS-232 or USB, or USB+RS-232 combo. For hardware, there are various board and connector types designed to meet different requirements. For software, the PenMount drivers support various system platforms such as Microsoft Windows, Linux, QNX, and others.

Resistive Touch Controller

Experienced in designing resistive touch controllers for 18 years, PenMount was the earliest resistive touch controller to appear on the market and has been dominating the field. In addition to the touch screens of 4-, 5- and 8-wire, almost all commonly-used system platforms available on market including the following can be supported by PenMount touch controller:

‧    Windows Vista / Windows 7

‧    Windows XP / 2000

‧    Windows NT/ Me / 98 / 95

‧    Windows CE 3.0 & .NET

‧    Windows 3.11/DOS

‧    Linux (different distribution)

In the following, we will guide you through AMT’s various IC controllers and Control Boards of resistive type:

‧     Controller IC

‧     Control Board

All drivers can be downloaded on AMT website free of charge. For more requirements for customization, your contact is welcome.